I have a thin belt, will the Profile or Echo quick clip work?
For thinner belts, you may need to remove the included 1/8” rubber spacers to allow the clip to properly hook the bottom of the belt.
Oct 27, 2021
No Comments
For thinner belts, you may need to remove the included 1/8” rubber spacers to allow the clip to properly hook the bottom of the belt.
ATTENTION: The Quick Clip hardware (screws) is left loose on purpose — we don’t want to squash the rubber spacers before you have the opportunity
Check the size of carrier first – look inside the carrier between the clip screws to see what size carrier you were shipped. S means
No. Every holster and mag carrier comes standard with a 1.5″ clip. Additional hardware such as soft loops, the Alias System or 1.75″ clips will
Check your clip, loop and screws on a regular basis to ensure everything is still secure and in place. Wash and wipe down the holster
Absolutely not! Real carbon fiber would be a terrible material to make holsters or mag carriers. Our carbon fiber patterned holsters are actually made from
We use .08. Many companies use .06 but we feel it is way to thin and flexible. .08 is barely thicker but much more rigid.
Replacement hardware packs can be purchased from our Holster Accessories. Replace hardware packs include screws, posts, washers, rubber spacers and more.
Due to our business model, we don’t offer any type of custom kydex work including specific model requests or modifications to the current holster or
The Echo Pro is an injection molded design, as opposed to the original handmade echo carrier, this is how we can offer it for a
